MagicEzy 9 Second CHIP FIX

Description of MagicEzy 9 Second CHIP FIX

Fix and Color Chipped Surfaces in Seconds Perfect for fiberglass boats, ceramic tiles, stone benchtops, *jet skis and more. If you’re frustrated with the time and mess involved with fixing damaged surfaces and getting the right color match, you’ll love MagicEzy 9 Second Chip Fix ™. MagicEzy 9 Second Chip Fix is a revolutionary nano-filler that fills, bonds, levels and colors damaged surfaces in seconds (without the need for a catalyst). It’s easy to use, even for a novice. There’s no sanding prep-work, mixing or color-matching required and no odor. Plus … repairs are guaranteed to last for at least 3 years.

Key features: Colors, bonds and fills in one application Delivers structural grade adhesion Comes in 11 popular colors Is suitable for cosmetic AND structural repairs Has a super high fill rate Has high elasticity for increased durability Can be sanded and drilled. Where can it be used? Fiberglass Boats Tiles Stone Benchtops Jet skis (PWC’s) Snow mobiles Fiberglass Showers and much more

1. Prepare MagicEzy 9 Second Chip Fix is water resistant. It is not recommended for use on areas continually submerged in water. Add a drop of dishwashing detergent in a cup of water and scrub into damage, then rinse with clean water. Allow to fully dry or use a hairdryer to accelerate drying time. Massage/rotate the tube between hands to ensure even consistency. HOW DO I ACHIEVE A GOOD COLOR MATCH? Simply mix two or more colors to form a new color on a piece of transparent plastic wrap placed over the surface.

2. Apply Have a tissue ready. For plastic or aluminum surfaces, apply a thin coat of MagicEzy MegaFusion Primer/Sealant and allow to cure. Apply a layer no bigger than ¼ inch (6mm) into the damage. Apply as many layers as needed to fill the damage, ensuring that each layers is dry (minimum 2 hours) before applying the next one. HOW DO I APPLY IN HOT / COLD WEATHER? In temperatures below 70ºF (20ºC), warm the surface for a couple of minutes with a hot hair dryer. In temperatures above 90ºF (30ºC), Cool the surface by laying a damp towel over the area before applying.

3. Level Turn the tube around and gently smooth the repair with the patented ‘LEVEL’ at 90º. NB: Only a very light touch is required (as if the level is floating on air). Clean the end of the LEVEL with the tissue. HOW DO I GET A GLOSS FINISH? Even though MagicEzy 9 Second Chip Fix has a matte finish, you can achieve a gloss look by applying a thin top coat of MagicEzy Hairline Fix.

4. Trim Trim to remove smears outside the repair edge (but not the repair itself). Use a damp cloth or tissue to help clean-up if necessary. Take your time and don’t keep touching the repair or the repair will look messy. If required, a second coat can be applied after 2 hours. Allow 24 hours for product to harden, however maximum strength and adhesion will be achieved after 7 days. HOW DO I APPLY ON VERTICAL SURFACES? To prevent slumping or for a faster dry time, use a hairdryer for 4 minutes to form a skin.